Analysis of the Coupling Effect in Different Meander-Type Winding Planar Transformers

Abstract : In this paper, planar printed-circuit board (PCB) transformers with different winding arrangements are presented. Three different arrangements of the primary and the secondary meander-type windings are designed and fabricated. The electrical parameters of the transformers for all three designs are analyzed and compared. A significant increase of inductance of the primary and the secondary winding is achieved with an appropriate meander-type winding arrangement. In the frequency range of interest, the inductance is approximately 145 nH for the first design, whereas the inductance is approximately 1250 nH for the second and the third design. The coupling coefficient is 0.14 for the first design, whereas it is around 0.9 for the second and the third design. The transformer of the proposed design is to be used in low-power DC/DC converters; therefore, the core with high permeability Ferroxcube 3C90 was chosen. In addition, the transformers of the same winding arrangements were tested with Ferroxcube 3F3 core.
Type de document :
Article dans une revue
IEEE Transactions on Magnetics, Institute of Electrical and Electronics Engineers, 2013, 49 (7), pp.3993 - 3996. 〈10.1109/TMAG.2013.2243417〉
Liste complète des métadonnées

https://hal-supelec.archives-ouvertes.fr/hal-01089723
Contributeur : Thierry Leblanc <>
Soumis le : mardi 2 décembre 2014 - 11:19:27
Dernière modification le : samedi 26 mai 2018 - 01:14:08

Identifiants

Collections

Citation

Snezana Djuric, Goran Stojanovic, Mirjana Damnjanovic, Eric Laboure. Analysis of the Coupling Effect in Different Meander-Type Winding Planar Transformers. IEEE Transactions on Magnetics, Institute of Electrical and Electronics Engineers, 2013, 49 (7), pp.3993 - 3996. 〈10.1109/TMAG.2013.2243417〉. 〈hal-01089723〉

Partager

Métriques

Consultations de la notice

55